BPWTT - SPEEDHIDE ALKYD GLASS ENAMELS, 6-F

  • MSDS: BPWTT
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: SPEEDHIDE ALKYD GLASS ENAMELS, 6-F
  • National Stock Number: 8010-00N036107
Product Identification

Product ID:SPEEDHIDE ALKYD GLASS ENAMELS, 6-F
MSDS Date:06/04/1990
FSC:8010
NIIN:00N036107
MSDS Number: BPWTT

Responsible Party
PPG INDUSTRIES INC
260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555;800-441-9695

Cage: 47695

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

Ingredients

PIGMENTS

Fraction By Weight: <1-2%


MINERAL SPIRITS; (MEDIUM ALIPHATIC SOLVENT NAPHTHA)

CAS: 64742-88-7

Fraction By Weight: <40-45%


XYLENE

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <1-2%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


FILM FORMERS, RESINS & ADDITIVES

Fraction By Weight: 75-80%


FOR INHAL OF TITANIUM DIOXIDE DUSTS FROM

RTECS: 9999999ZZ


THERE IS NO SIGNIFICANT HAZ FOR MAN. SYMPS OF

RTECS: 9999999ZZ


INDICATIONS THAT SOLV LEVELS ARE TOO HIGH. RED, ITCH,

RTECS: 9999999ZZ


EYE CONT. DRY, ITCH, CRACK, BURN, RED, & SWELLING ARE

RTECS: 9999999ZZ


TYPE OF AIRBORNE CONTAMINANTS AGAINST WHICH RESP

RTECS: 9999999ZZ


EXPOS LIM, LEL BELOW STATED LIM, & TO REMOVE DECOMP

RTECS: 9999999ZZ


RUBB, NEOPRENE RUBBER OR POLYVINYL ALCOHOL.

RTECS: 9999999ZZ


CORR MATL, PERSISTENT SKIN/EYE IRRIT/BRTHG

RTECS: 9999999ZZ


ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: <10-15%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
SWALLOWED. EYE: CAUSES IRRIT. SKIN: MAY CAUSE MOD IRRIT. INHAL: VAP
& SPRAY MIST MAY BE HARMFUL IF INHALED. VAP IRRITATES EYES, NOSE, &
THROAT. RPTD EXPOS TO HIGH VAP C ONC MAY CAUSE IRRIT OF RESP SYS &
PERM BRAIN & NERV SYS DAM. INTENTIONAL MISUSE BY DELIB CONC & (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INHALING CONTENTS CAN BE
HARMFUL/FATAL. CHRONIC: AVOID LONG TERM & RPTD CONT. PROD CNTNS
TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE QTY OF TITANIUM DIOXIDE
DUST IN A LONG-TERM STUDY DEVELOPE D LUNG TUMORS. STUDIES W/HUMANS
INVOLVED IN MFR OF PIGMENT INDICATE NO INCR RISK OF CANCER FROM
EXPOS. POTNTL (ING 6)

First Aid

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR @ LST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING, FOLLOWED
BY WATERLESS HAND CLEANER & SOAP/WATER. INHAL: REMOVE TO FRESH AIR.
APPLY AR TF RESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF ANY
OF FOLLOW OCCUR DURING/FOLLOW USE OF PROD, CONT POIS CTL CTR EMER
ROOM/PHYS IMMED. HAVE MSDS INFO AVAILABLE. INGEST, EXCESS EXPOS TO
(ING 13)

Fire Fighting

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:1%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING (SUPP
DATA)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CONTRS TO PVNT PRESS BUILDUP & POSS(SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS, & OPEN FLAMES. CLSD CONTRS MAY EXPLODE
WHEN EXPOS TO EXTREME HEAT. DO NOT APPLY ON (SUPP DATA)

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN/EYE PROT SHOULD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSORB MATL & PLACE INTO CONTRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTY
IN BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS II
COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF A MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS RSLTG
MIXT MAY HAVE HAZ OF ALL ITS PARTS. CONTRS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FALL OF LIQ IN EXCESS OF A FEW IN.

Exposure Controls

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
CTLS, VAP EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C) PAINT
SPRAY/AIR SUPPLIED (TC-19C) RESP MAY ALSO REDUCE EXPOS. READ RESP
MFR'S INSTRUCTIONS & LITERATURE CAREFULLY TO DETERM (ING 10)
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC OF INGRED LISTED BELOW LOWEST SUGGESTED (ING 11)
Protective Gloves:GLOVES CONSTRUCTED OF: NITRILE (ING 12)
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:WEAR PROT CLTHG, INCL IMPERMEABLE APRON
CONSTRUCTED OF: NITRILE RUBB, NEOPRENE RUBB/POLYVINYL ALCOHOL.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA: NFPA CLASS II COMBUST LIQ FIRES. FIRE FIGHT PROC:
AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZ ARE PREF. EXPLO HAZ: HOT SURF. TOX GASES MAY FORM WHEN PROD IS
CO NTACTED BY FLAME/HOT SURF. HAZ DECOMP: CARBON MONOXIDE.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:>100F,>38C
Vapor Pres:<3
Vapor Density:HVR/AIR
Spec Gravity:1-1.3
Evaporation Rate & Reference:<19(BUOAC=1)
Solubility in Water:<1%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF SOLVENTS
LISTED IN INGREDIENTS
Percent Volatiles by Volume:<54

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONT W/STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PROD WHEN HEATED.
WELD/BRAZ/FLAME-CUTTING ON SURF COATED W/PROD MAY PRDCE FUMES INCL
(SUPP DATA)

Disposal

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W FED,
ST, PROVINCIAL, & LOCAL ENVIRONMENTAL CTL REGS. EMPTY CONTAINERS
SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED WASTE
MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.